The system uses the scroll compressor system with the new refrigerant R407C. In addition, in comparison with conventional chiller cooling systems, this system achieves 60% ～ 90% cuts in power costs and 30% ～ 60% cuts in power consumption.

Integrated design means that this system takes up approximately half the space of conventional systems. In addition, there is no need for special housing in the case of outside installation.

Time taken for design and construction in situ is greatly reduced. Because the control panel is built-in, there is no need for instrument installation except remote control wiring for externally operated start-stop and alarm signal systems, etc.

Because the system is closed, there is less danger of mechanical problems due to soiling of the chilled water.

(Δt = 10oC ～ 25oC)

The system uses the scroll compressor system with the new refrigerant R407C. In addition, in comparison with conventional chiller cooling systems, this system cuts power consumption costs by approximately half (when the supply is at 20oC and Δt=5oC).

The use of air as a coolant means that no water is percolated, ensuring that there is no occurrence of scale and algae in the cooling tower section.

Time taken for design and construction in situ is greatly reduced. Because the control panel is built-in, there is no need for instrument installation except remote control wiring for externally operated start-stop and alarm signal systems, etc.

Because the system is closed, there is less danger of mechanical problems due to soiling of the chilled water.

(Δt = 10oC ～ 15oC)