HI-PM 7
( AISI-P20 / DIN na / W-Nr. na / JIS na )
Chemical composition (%) ( typical )
Std. | AISI | DIN | W-Nr. | JIS | YSS |
---|---|---|---|---|---|
Designation | P20 | - | - | - | HI-PM 7 |
C | 0.28-0.40 | - | - | - | 0.15 |
Si | 0.20-0.80 | - | - | - | 0.20 |
Mn | 0.60-1.00 | - | - | - | 1.80 |
Ni | - | - | - | - | - |
Cr | 1.40-2.00 | - | - | - | 1.80 |
Mo | 0.30-0.55 | - | - | - | 0.40 |
W | - | - | - | - | - |
V | - | - | - | - | 0.10 |
Co | - | - | - | - | - |
others | 0.00 | - | - | - | Cu:0.3 |
Standard Heat Treatment temperature ( centigrade )
Annealing | - |
---|---|
Quenching | Pre-Hardened Steel |
Tempering | - |
Delivery hardness ( HBW ) | 29-33 HRC |
Hardening hardness ( HRC ) | - |
Application
Mold required good weldability & machinability (Autoparts, Home electronics, House equipment) |
YSS Recommended Tool Steels
YSS Symbol | Features |
---|---|
HI-PM MAGIC | Prehardened: 37 - 41HRC Plastic Mold Steel for general purposes |
CENA 1(TM) | Prehardened: 37 - 42HRC, High Performance Plastic Mold Steel with rust resistivity and excellent machinability. |
CENA(TM)-V | Prehardened: 35 - 41HRC, Advanced Plastic Mold Steel corresponding to the good stain resistance and high-quality mirror surface polishing. |
HI-PM PRO | Prehardened: 37 - 41HRC Precipitation Hardening, Rust-Resisting Grade for Precise Mold |
HI-PM 7 | Prehardened: 29 - 33HRC For Medium and Large Mold for General Application |
HI-PM 38 | Prehardened: 29 - 33HRC Hardenable to: 50 - 55HRC For Anti-Corrosion and Mirror Polish Mold |
HI-PM 38S | Prehardened: 29 - 33HRC Hardenable to: 50 - 55HRC For Super Mirror Polish Mold |
PSL(TM) | Prehardened: 33 - 37HRC(Flat bar) 38 - 42HRC(Round bar) For Higher Grade Anti-Corrosion Mold |
HI-PM 77 | Prehardened: 29 - 33HRC Free Machining Martensitic Stainless Grade for Mold Base |
HI-PM 31 | Hardenable to: 55 - 60HRC High Wear Resistant Grade for Mass Production |
YAG(TM) | Hardenable to: 52 - 57HRC Super High Toughness Maraging Steel |
HI-PM 75 | Hardenable to: 40 - 45HRC Non-Magnetic High Hardness Free Machining Plastic Mold Steel |
YSS Properties Comparison Table
Grade | Machinability | EDM/Creping texture |
Mirror polishability | Weldability | Rust resistance | Wear resistance | Toughness | Cost |
---|---|---|---|---|---|---|---|---|
HI-PM7 | A | C | C | A | D | D | B | B |
HI-PM77 | B | D | D | C | B | D | C | C |
PSL(TM) | D | B | C | A | A | D | B | D |
CENA1(TM) | C | A | B | C | C | D | C | D |
HI-PM MAGIC | B | B | C+ | A | D | D | B | C |
HI-PM PRO | B | A | B | B | D | D | C | D |
HI-PM1 | A | D | D | D | D | D | D | C |
FDAC(TM) | C | D | D | C | D | C | C | C |
HI-PM38 | C | A | A | C | B | C | C | D |
HI-PM38S | C | A | A+ | C | B | C | C | E |
HI-PM31 | C | A | B | D | C | B | C | D |
HAP(TM)5R | C | A | B | D | E | B | B | E |
ZCD(TM)-M | D | A | D | E | C | B | D | D |
ZDP(TM)4 | E | B | B | E | C | A | E | E |
HI-PM75 | E | D | D | E | B | C | C | E |
YAG(TM) | D | A | A | A | D | C | A | E |